少妇野外一级内射婬片免费放,爆乳无码av一区二区三区,麻豆国产精品无码视频欧美变态另类残忍视频,久久久久精品久久久久影院蜜桃,少妇被又大又粗又爽毛片黑人无码乱码av天堂一区二区,久久ri精品高清一区二区三区,人妻洗澡被强公日日澡,日日躁夜夜躁夜夜揉揉

大連注塑成型
Your current location : Home >>  news >> Company news

Contact UsContact Us

Dalian Jinghe Molding Co., Ltd

Dalian Chenghua plastic products Co., Ltd

Tel:0411-87840676

Fax:0411-87840576

Web:www.ganaelle.com/en

E-mail:office@dlchenghua.cn

              office@dljinghe.com

Add:No. 343, Jinwan Road, Zhanqian Street (Majia New Village), Jinzhou District, Dalian

Precautions in the process of transparent plastic injection molding

release date:2023-01-19 00:00 source: http://www.ganaelle.com Click:

Injection molding is a method of industrial product production molding. Products usually use rubber injection molding and plastic injection molding. Injection molding can also be divided into Dalian injection molding molding method and die-casting method. Injection molding machines (abbreviated as injection molding machines or injection molding machines) use plastic molds to make various shapes of plastic products from thermoplastic or thermosetting materials.

(1) Liquidity

1. The flowability of thermoplastic materials can generally be analyzed based on a series of indices such as molecular weight, melt index, Archimedean spiral flow length, apparent viscosity, and flow ratio (process length/plastic wall thickness). Small molecular weight, wide molecular weight distribution, poor molecular structure regularity, high melt index, long screw flow length, low apparent viscosity, and high flow ratio result in good flowability. For plastics of the same product name, it is necessary to check their instructions to determine whether their flowability is suitable for injection molding. According to mold design requirements, the flowability of commonly used plastics can be roughly divided into three categories:

① Good flowability PA, PE, PS, PP, CA, poly (4) methylene;

② Moderate fluidity polystyrene series resins (such as ABS, AS), PMMA, POM, polyphenylene ether;

③ Poor fluidity PC, hard PVC, polyphenylene ether, polysulfone, polyarylsulfone, fluoroplastics.

2. The fluidity of various plastics also varies due to various molding factors, and the main influencing factors are as follows:

① When the temperature of the material is high, the flowability increases, but different plastics also have differences. The flowability of plastics such as PS (especially those with high impact resistance and MFR value), PP, PA, PMMA, modified polystyrene (such as ABS, AS), PC, CA, etc. varies greatly with temperature. For PE and POM, the increase or decrease in temperature has little effect on their fluidity. So the former should adjust the temperature to control the fluidity during molding.

② When the injection pressure increases, the molten material is subjected to greater shear action and increases its fluidity, especially PE and POM are more sensitive. Therefore, it is advisable to adjust the injection pressure during molding to control the fluidity.

③ The form, size, arrangement, cooling system design, and flow resistance of molten material (such as surface smoothness, material channel cross-sectional thickness, cavity shape, exhaust system) of the mold structure pouring system all directly affect the actual flow of molten material in the cavity. Those factors that promote the temperature reduction and increase flow resistance of molten material will reduce its flow resistance. When designing the mold, a reasonable structure should be selected based on the fluidity of the plastic used. During molding, factors such as material temperature, mold temperature, injection pressure, and injection speed can also be controlled to appropriately adjust the filling situation to meet the molding needs.

(2) Cleaning of the barrel, screw and its accessories

To prevent contamination of raw materials and the presence of old materials or impurities in the recesses of screws and accessories, especially resin with poor thermal stability, screw cleaning agents should be used to clean all parts before use and after shutdown to ensure that no impurities are adhered. When there is no screw cleaning agent, PE, PS and other resins can be used to clean the screws. When the machine is temporarily shut down, in order to prevent the raw materials from staying at high temperatures for a long time and causing temperature drop, the temperature of the dryer and machine barrel should be reduced, such as the temperature of PC, PMMA, and other machine barrels should be reduced to below 160 ℃ (the temperature of the hopper should be reduced to 100 for PC)



11.png

Related tags:

  • Add:No. 343, Jinwan Road, Zhanqian Street (Majia New Village), Jinzhou District, Dalian
    Add:No. 343, Jinwan Road, Zhanqian Street (Majia New Village), Jinzhou District, Dalian
  • E-mail:office@dlchenghua.cn
    E-mail:office@dlchenghua.cn
  • Tel:0411-87840676
    Tel:0411-87840676
Professional production enterprise engaged in plastic injection molding, extrusion and blow molding

1637907000586125.png

Wechat        Mobile

Dalian Chenghua plastic products Co., Ltd

Dalian Jinghe Molding Co., Ltd

久久精品中文字幕免| 日本大片免a费观看视频| 欧美人与动牲交a精品| 福利午夜757久久久| 亚洲自慰白浆无码AV专区| 国产日韩欧美综合视频专区| 亚洲人成自拍网站在线观看| 精品国产一区二区三区AV性色| 国产欧美动漫日韩二区| 伊人成综合网开心五月丁香五| 亚洲最新av片不卡无码久久| 护士交换粗吟配乱大交换绿帽| 亚洲人成自拍网站在线观看| 柠檬AV导航国产精品久久久| 国产午夜福利片在线观看| 中文字幕在线视频第一页| А√天堂资源官网在线资源| 亚洲欧美色国产综合| 6080亚洲人久久精品| 免费最婬荡的毛片中文| 亚洲AV综合永久无码精品| 久久精品国产99久久72部| 中文字幕理伦午夜福利片| 亚洲成a人片在线观看国产| 久久乐国产精品亚洲综合| 蜜臀av无码人妻精品| 久久精品a一国产成人免费网站| 久久婷婷综合色丁香五月| 精品丰满人妻无套内射| 欧美午夜一区二区福利视频 | 欧美高清性色生活片免费观看| 国产成人无码a区视频在线观看| 亚洲国产综合久久香蕉| 亚洲欧美国产成人久久| 99久久99久久精品免费看蜜桃| 国产成人久久精品二三区无码| 一区二区三区综合区精品久久久中文字幕一区| 亚洲国产成人综合精品| 国产成人AAAAA级毛片| 国产一区二区三区观看| 亚洲AV无码一区二区三区久久精品|